The NMX-ENC-N2312 Encoder provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switchingsolution that can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks. Any source can be sent to one or more displays by routing through layer-2 / layer-3 switches utilizing standard Cat5e cable. The NMX-ENC-N2312 includes standard features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension. It also comes in a card version compatible with SVSI’s N9206 card cage for high-density applications.
Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders.
Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, highdensity installations
Infrared (IR) – Emitter connection allows control of IR-only display devices.
Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
Balanced and Unbalanced Audio – Embedded 7.1 digital audio or balanced/unbalanced analog audio
Pass Through HDMI – allows easy installation with local display such as desktop PC applications
Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections
KVM – S... Show More
The NMX-ENC-N2312 Encoder provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switchingsolution that can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks. Any source can be sent to one or more displays by routing through layer-2 / layer-3 switches utilizing standard Cat5e cable. The NMX-ENC-N2312 includes standard features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension. It also comes in a card version compatible with SVSI’s N9206 card cage for high-density applications.
Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders.
Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, highdensity installations
Infrared (IR) – Emitter connection allows control of IR-only display devices.
Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
Balanced and Unbalanced Audio – Embedded 7.1 digital audio or balanced/unbalanced analog audio
Pass Through HDMI – allows easy installation with local display such as desktop PC applications
Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections
KVM – Single USB-B for KVM applications
Native NetLinx – NetLinx Studio will easily recognize the device
Display Your Hospitality with Brilliant 4K Video Distribution
The AMX SVSI N2300 series encoders and decoder distribute stunning 4K visual quality with low latency, low bandwidth consumption, and low power consumption - all at an extremely competitive price. Perfect for casinos, bars and restaurants, hotel spaces, and anyplace video can enhance the guest experience.
Reinvent Space
Need to add video displays to a ballroom? Run video to temporary lobby kiosks? No problem. The N2300 is perfect for reconfigurable spaces. Simply run a standard category cable, add a decoder, and access video from the network.
Grow Big or Small
Expand without replacing infrastructure. With the N2300, simply add an encoder to each additional video source and a decoder to each additional video display or projector. So go ahead, add as many displays as you want for the big game.
Feature-Rich. Enterprise Grade. Secure.
Enterprise grade features like Power over Ethernet, LocalPlay, HostPlay, HDMI 2.0/HDCP 2.2 support, and the ability to easily adjust bandwidth and resolution to precisely meet the needs of the application; along with AES128 encryption makes it clear that our products are designed with the enterprise network in mind.
VIDEO
Digital Video Input - HDMI 2.0, DVI-D* (through adapter), Dual-Mode DisplayPort (DP++); These signal types are supported through a passive adapter
Analog Video Input - HD-15 VGA
Video Output - Network video over Ethernet via RJ45 port or SFP via 1G SFP port, HDMI, DVI-D; These signal types are supported through a passive adapter
Formats - HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
Progressive Input Resolutions - Supports 4K30 4:2:0 and most common HD resolutions up to 1920x1200; HDMI and DVI (Progressive):
Pixel clock between 27 MHz – 300MHz
Minimum resolution of 720x480p60
Maximum horizontal resolution of 4096 or a vertical resolution of 2160
Common acceptable resolutions include: 720x480p60 – 480p, 720x576@50, 800x600p60, 1024x768p60, 1280x720@60Hz - 720p60, 1600x1200@60Hz, 1920x1080@60Hz - 1080p60, 3840x2160(4:2:0)@30Hz - UHD30 aka 4K30, 4096x2160(4:2:0)@30Hz - DCI 4K30
Interlaced Input Resolutions - Supports 1080i60; HDMI and DVI (Interlaced):
1920x1080@50Hz - 1080i50
1920x1080@60Hz - 1080i60
Note: Interlaced resolutions will be de-interlaced if scaled on the decoder; otherwise, the interlaced signal will pass through to the display
Analog Input Resolutions - Supports most common HD resolutions up to 1920x1200; VGA:
Pixel clock between 27 MHz - 165 MHz
Minimum resolution of 640x480
Maximum horizontal resolution of 1920 or a vertical resolution of 1200
Common acceptable resolutions include: 640x480p60, 720x480p60 – 480p, 720x576@50, 800x600p60, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz (reduced blanking)
Note: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz
The N2312 Encoder does not accept Composite or S-Video (YC)
Analog-To-Digital Conversion - 8-bit 165 MHz per each of three color channels
Color Space - 4:4:4 – HD (1920x1200 and lower)
LocalPlay/HostPlay - 8 playlists
HostPlay - 1 image/list
Note - Jumbo Frames Required
Video Wall Construction - Supported within the NMX-DEC-N2322, the N2300 Series is not compatible with SVSI Windowing Processors at this time
Network Video Recording - Not compatible with SVSI NVR at this time
AUDIO
Input Signal Types - Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
Output Signal Types - Ethernet, Embedded audio on HDMI or DVI-D (through adapter)
HDMI Audio Formats - 8ch PCM
Analog Audio Format - Stereo 2-channel
Analog-To-Digital Conversion - 48 kHz
KEYBOARD AND MOUSE
Keyboard & Mouse - Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
LATENCY
Latency - 17-ms at 60 fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30
NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Scaling adds one frame of latency (17ms at 60fps)
Switching - Up to 1.5s delay, not seamless
BANDWIDTH
Bandwidth - Approximately 160 Mb/s
Note: Minimum bandwidth is 50 Mb/s for resolutions <= 1080p60
COMMUNICATIONS
Ethernet: PO - 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
Ethernet: P1 - 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP
HDMI - HDCP, EDID management
PORTS
+12V - 2A One 12 Volt DC power input
P0 - 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port; Provides network connection, network AV video, and power to the Encoders and Decoders PoE power
P1 - 1-Gbps SFP port (SFP fiber transceiver or direct attach cable not included); Provides network connection and networked AV video
IR IN (front panel) - 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (not included)
IR OUT - 2-pin terminal Phoenix connector; Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (not included)
RS232 - 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication; Available terminal speed settings: 1200-115200 baud rate
AUDIO - 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input; Dedicated audio input
HDMI OUT - HDMI video output (passive pass-through from HDMI IN only)
HDMI IN - HDMI video input
VGA IN - DB15 analog input
CONTROLS AND INDICATORS – FRONT PANEL
RESET Button - Recessed pushbutton; Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
ID Button - Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
POWER LED - On solid (green) when operating power is supplied (via PoE or local power supply); This activity is also shown by the PWR LED on the rear panel
STATUS LED - On flashing (green) when there is software activity; This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS – REAR PANEL
PWR LED - Same as POWER LED described above
HDMI LED - On (green) when there is a connection to a valid HDMI source but will not light for VGA source
STAT LED - Same as STATUS LED described above
STRM LED - On (green) when the unit is streaming video
POWER SUPPLY
Power Supply, External, Optional - 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional NMX-ACC-N9312 (FGN9312)
Power over Ethernet (PoE), External, Optional - Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
NOTE: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) portWarning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
ENVIRONMENTAL
Temperature - 32° to 104°F (0° to 40°C)
Humidity - 10% to 90% RH (non-condensing)
Heat Dissipation - Up to ~44 BTU/hr.
GENERAL
Dimensions (HWD) - 1.05” x 7.888” x 5.5” (2.67 cm x 20.04 cm x 13.8 cm)
Weight - 1.6 lbs (0.66 kg)
Mounting Options - Stand alone, surface mount, wall mount, or rack mount
Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
Rack mounting requires one of the following (not included): NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders; NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
Regulatory Compliance - FCC, CE, and NTRL
Recommended Accessories - NMX-ACC-N9312 (FGN9312), Power Supply 12V External
NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders and Decoders
NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders and Decoders
NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
Skip to content
