Skip to content

Audio-Technica AT-LP3BK Fully Automatic Belt-Drive Turntable Bundle with DT 770-PRO Headphones

Condition: New
Original price $799.99
Original price $799.99 - Original price $799.99
Original price $799.99
Current price $399.00
$399.00 - $399.00
Current price $399.00
SKU E2ATLP3BK
Item Description
  • Fully automatic belt-drive turntable operation
  • Two-speeds: 33-1/3, 45 RPM
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable pre-amp modes
  • Anti-resonance, die-cast aluminum platter
  • Recommended Accessories

    • Original price $29.99
      Original price $29.99 - Original price $29.99
      Original price $29.99
      Current price $19.99
      $19.99 - $19.99
      Current price $19.99

      Stanley 30024 PowerMax USB, 6-Outlet Power Strip with 2 USB Ports (2.1A Total)

      Stanley

      This Stanley 6-outlet power strip features 6 grounded outlets, an on/off switch with built in circuit breaker and 2 USB ports (2. 1A Total). A 3ft ...

      View full details
      Original price $29.99
      Original price $29.99 - Original price $29.99
      Original price $29.99
      Current price $19.99
      $19.99 - $19.99
      Current price $19.99

    Overview

    Overview

    • Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM
    • Balanced straight tone arm wtih hydraulically damped lift control and rest
    • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
    • Switchable pre-amp modes for moving magnet and moving coil cartridges
    • .5-inch mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
    • Anti-resonance, die-cast aluminum platter with 4mm thick rubber mat
    • Damped base construction for reduced low-frequency feedback coloration
    • Includes 45 RPM adapter and removable hinged dust cover

    The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a .5-inch mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other movin magnet or moving coil cartridges of your choosing.

    A hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record. Yet the turntable ... Show More

    Overview

    • Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM
    • Balanced straight tone arm wtih hydraulically damped lift control and rest
    • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
    • Switchable pre-amp modes for moving magnet and moving coil cartridges
    • .5-inch mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
    • Anti-resonance, die-cast aluminum platter with 4mm thick rubber mat
    • Damped base construction for reduced low-frequency feedback coloration
    • Includes 45 RPM adapter and removable hinged dust cover

    The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a .5-inch mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other movin magnet or moving coil cartridges of your choosing.

    A hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record. Yet the turntable also offers fully automatic operation, so you can simply press the Start button to begin play and the Stop button to lift and return the tone arm and shut off the turntable (the stop function occurs automatically when a record has played all the way through).

    The AT-LP3 is constructed of anti-vibration damping materials that limits low-frequency feedback. Resonance is futher reduced by the turntable's die-cast aluminum platter and accompanying 4 mm rubber damping mat. Equipped to play both 33-1/3 and 45 RPM records, the AT-LP3 features a built-in switchable phono preamp an an attached dual RCA output cable that enable it be connected to a home stereo, powered speakers and other components whether they have a dedicated turntable input or not.

    Specifications

    • Type: Belt-drive turntable, fully automatic
    • Motor: DC servo-controlled
    • Speeds: 33-1/3 RPM, 45 RPM
    • Turntable Platter: Die-cast aluminum
    • Wow and Flutter: Less than 0.25-percent (WTD) at 3 kHz (JIS)
    • Signal-to-Noise Ratio: less than 50 dB (DIN-B)
    • Output Level: Pre-amp PHONO: 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec, Pre-amp LINE 129-313 mV nominal at 1 kHz, 5 cm/sec
    • Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
    • Power Supply Requirements: 120V AC, 60 Hz
    • Dimensions: 434.0 mm (17.1-inch) W x 128.0 mm (5.0-inch) H x 350.0 mm (13.8-inch) D
    • Weight: 5.2 kg (11.5 lbs)
    • Accessories Included: AT91R Dual Moving Magnet stereo cartridge with replaceable stylus, 1/2-inch mount universal headshell, power cord, 45 ROM adapter, removable hinged dust cover, 4 mm rubber mat

    BeyerDynamic DT 770-PRO Studio Headphones (80 Ohms) (Closed Dynamic)

    beyerdynamic's DT 770 PRO headphones has its roots in the early 1980s. Since then, millions of audio professionals from all parts of the world have become loyal users of beyerdynamic products.

    The DT 770 PRO is a closed dynamic headphone and was designed for critical music and sound monitoring in an open environment. It has exceptional quality suitable for the most demanding professional and audiophile applications. The long term comfort and accurate performance make the DT 770 PRO the perfect monitoring headphone for recording studios, post production or broadcasting situations. It has a bass reflex system to give low-frequency response down to 5 Hz and is equalized to the diffuse sound field. The weight of the diaphragm and moving coil of this headphone is approx. 20% compared to other current models. As a result, the DT 770 PRO offers similar pulse characteristics as electrostatic headphones. The cushion systems and light weight allow the DT 770 PRO to be used in complete comfort for long periods. Soft earpads and adjustable, sliding, earpieces together with a single sided connecting cable ensure easy handling and listening comfort during extended periods of use.

    80 ohms DT 770 Pro is optimized for very high listening levels in a recording studio, for example musicians, playing an instrument, etc.. You normally can find very high power headphone amplifiers here and achievable level is more important than the last bit of sound quality. This transducer uses an overhang voicecoil, which is longer than the air gap. Its larger surface increases the electrical power handling (better cooling) but its higher mass results in a different distortion behavior.

    Product Features:

    • Sound you can rely on
    • Superior build quality
    • For recording applications within the studio or stage
    • Closed reference diffuse-field studio headphone for control and monitoring applications
    • Innovative "Bass reflex" technology for improved bass response
    • Comfortable fit due to rugged, adjustable, spring steel, soft padded inner headband construction
    • Robust, easy serviceable construction as all parts are replaceable
    • Velour, circumaural and replaceable ear pads
    • 3.0 m (9.8 ft.) straight cable (single-sided)
    • Including drawstring bag

    Product Specifications:

    Transmission type: Wired
    Transducer type: Dynamic
    Headphone design (operating principle): Closed
    Headphone impedance: 80 ohms
    Headphone frequency response: 5 - 35.000 Hz
    Nominal sound pressure level: 96 dB
    T.H.D.: <0.2%
    Power handling capacity: 100 mW
    Ambient noise attenuation: approx. 18 dBA
    Nominal headband pressure: approx. 3.5 N
    Construction: Circumaural (around the ear)
    Cable & Plug: Straight connecting 3m cable with gold plated stereo mini-jack plug (3.5 mm) and 1/4" adapter (6.35 mm)
    Weight:  270 g
    Origin: Made in Germany
    Warranty: Two Year Warranty


    Show Less

    Box Includes

    • AT-LP3BK Stereo Turntable, Black
    • 45 RPM adapter
    • Removable hinged dust cover
    • 1-Year Limited Warranty

    • Authorized USA Dealer

    • INCLUDED IN THE BUNDLE:
    • BeyerDynamic DT-770-PRO Headphones
    • Adapter
    • Drawstring Bag
    • Two Year Warranty
    x