Cost effective and easy to set up with quality sound High-strand count (0.254mm x 26 strands) copper clad aluminum 16 AWG conductors easily route ...
View full details
10ft XLR Male to XLR Female 16AWG Cable (Gold Plated) [Microphone and Interconnect] Balanced audio cables utilize impedance balanced lines that red...
View full details
This Bluetooth transmitter and Receiver supports 2 devices working simultaneously. When used as a Bluetooth transmitter, it can connect your phone,...
View full details
6ft High Speed HDMI Cable - Black Features: Fully Shielded High Quality Construction 6 Foot Cable Length
Essential Harware Kit for the SkyBell 2.0 - Includes: Set Screw x1, Special Tool x1, Connectors x4, Screws x2, Anchors x2
LCT 81C/T is a full-range ceiling speaker designed to lay into a 2 ft x 2 ft US-style suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost-effective installation with a minimum of mess. The low profile depth of only 100 mm (4 in) allows the speaker to fit in locations where deeper loudspeakers do not.
High efficiency 200 mm (8 in) dual-cone driver.
Easy lay-in installation into 2' x 2' US-style suspended grid ceilings. No cutting of ceiling tiles is necessary.
Perforated metal grille included.
Combined 70V/100V and low impedance direct operation.
20 Watts at 8Ω (low-impedance) direct setting.
10 Watt multi-tap at 70V/100V with taps at 10W, 5W, 2.5W (and 1.3W for 70V only)
Very low-profile at just 103 mm (4.1 in) deep, to fit into ceilings that are shallow or that contain obstructions.
Easy bare-wire connection in protected compartment. Wire entrance from either top or side via knock-out.
Very high 96 dB sensitivity turns power from small amplifiers into maximum sound level for listeners.
Designed for high speech intelligibility.
100° coverage pattern (conical).
UL1480A and UL2043 certifications for use in ceiling plenum spaces.
Diverse Application
This loudspeaker is designed to provide excellent performance for paging and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more.
High Sensativity
LCT 81C/T contains a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 ... Show More
LCT 81C/T is a full-range ceiling speaker designed to lay into a 2 ft x 2 ft US-style suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost-effective installation with a minimum of mess. The low profile depth of only 100 mm (4 in) allows the speaker to fit in locations where deeper loudspeakers do not.
High efficiency 200 mm (8 in) dual-cone driver.
Easy lay-in installation into 2' x 2' US-style suspended grid ceilings. No cutting of ceiling tiles is necessary.
Perforated metal grille included.
Combined 70V/100V and low impedance direct operation.
20 Watts at 8Ω (low-impedance) direct setting.
10 Watt multi-tap at 70V/100V with taps at 10W, 5W, 2.5W (and 1.3W for 70V only)
Very low-profile at just 103 mm (4.1 in) deep, to fit into ceilings that are shallow or that contain obstructions.
Easy bare-wire connection in protected compartment. Wire entrance from either top or side via knock-out.
Very high 96 dB sensitivity turns power from small amplifiers into maximum sound level for listeners.
Designed for high speech intelligibility.
100° coverage pattern (conical).
UL1480A and UL2043 certifications for use in ceiling plenum spaces.
Diverse Application
This loudspeaker is designed to provide excellent performance for paging and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more.
High Sensativity
LCT 81C/T contains a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 mm (1 in) diameter voice coil with a Kapton coil-former and high-temperature wire for better power dissipation and long-term reliability.
Versatile Installation Methods
The speaker's built-in 10 Watt transformer provides versatility by allowing use on 100V or 70V distributed loudspeaker lines, as well as at 8 ohms (low impedance) for driving directly from a lowimpedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure.
Secure Mounting
Two safety seismic attachment tabs are provided for securing to ceiling deck, plus 4 holes are provided -- one in each corner. The color of the perforated grille is white.
System
Frequency Range (-10 dB) - 100 Hz – 16 kHz
Power Capacity (at low-Z) - 40 Watts Continuous Program Power
20 Watts Continuous Pink Noise
Nominal Sensitivity - 96 dB
Nominal Coverage Angle - 100° conical coverage (ave. 1 kHz - 4 kHz)
Rated Maximum SPL - 108 dB @ 1 m (3.3 ft) average, 114 dB peak (at 8Ω setting)
Nominal Impedance - 8 ohms (in Direct/Thru 8Ω setting)
Transformer Taps - 10 W, 5 W, 2.5 W @ 70V or 100V (plus 1.3 W @ 70V only)
Transducer
Full-Range Driver - High-efficiency 200 mm (8 inch) dual-cone driver with 25 mm (1 in) diameter voice coil, Kapton coil former, and high-temperature voice coil wire.
Enclosure
Input Connection - Bare wire inside protected in touch-proof wiring compartment.
Materials - Steel rear enclosure, front baffle, and perforated grille
Grille Color - White
Safety Agency - Suitable for use in air handling spaces. Certified per: UL1480A -- Speakers for Fire Alarm and Signaling Systems; UL2043 -- Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air-Handling Spaces; NFPA90 & NFPA70; S7232/UL Listed, Signaling Speaker.
Dimensions - 607 x 607 x 103 mm (23.9 x 23.9 x 4.1 in)
Net Weight - 7.1 kg (15.7 lbs)
Shipping Weight - 8.3kg ea; 16.5 kg per pair-pack (18.3 lbs ea; 36.4 lbs per pair-pack)
Ceiling Cutout Size - No cutout required. Speaker drops into ceiling grid (see installation drawing)
Suspension / Safety-Seismic Attachment Points - Two tabs on back baffle, plus 4 holes in corners
Skip to content
