The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. Magnetic shielding allows use of the speaker in close proximity to video monitors.
Built-in InvisiBall mounting hardware, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
High fidelity sound character with broad frequency response of 70 Hz – 20 kHz
The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8Ω impedance allows use of more speakers on a loudspeaker line.
The unique, global patent pending InvisiBall® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any décor.
Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL’s WeatherEdge™, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
The Control 25AV can be used full range or low frequencies can... Show More
The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. Magnetic shielding allows use of the speaker in close proximity to video monitors.
Built-in InvisiBall mounting hardware, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
High fidelity sound character with broad frequency response of 70 Hz – 20 kHz
The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8Ω impedance allows use of more speakers on a loudspeaker line.
The unique, global patent pending InvisiBall® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any décor.
Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL’s WeatherEdge™, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
The Control 25AV can be used full range or low frequencies can be further augmented with the addition of one of the Control Contractor subwoofer models.
System
Frequency Range - (-10 dB)1 70 Hz – 23 kHz
Midrange - (±1.5 dB, typical)2 130 Hz – 14 kHz
100 Hr Power Capacity - 200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
Nominal Coverage - 100° x 100°
Nominal Sensitivity - 87 dB SPL, 1W @ 1 m (3.3ft)
Nominal Coverage - 100° x 100°
Maximum - SPL @ 1m 113 dB continuous peak pink noise
107 dB continuous average pink noise
103 dB continuous average music or speech
Directivity Factor - (Q) 4.9, averaged 500 Hz to 4 kHz
Directivity Index - (DI) 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance - 8 ohms
Minimum Impedance - 6.7 ohms at 230 Hz
Crossover Type - 2nd order lowpass, 2nd order highpass, complex optimization for maximally flat response
Transformer Taps - 170V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1)
100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)
Thru position: 8 nominal
Transducers
Low Frequency - 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
High Frequency - 20 mm (0.75 in) titanium-coated PEI
Physical
Enclosure Material - High-impact polystyrene
Grille - Painted stainless steel, black or white to match cabinet, paintable
Overload Protection - Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
Environmental - Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
Termination - Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire (up to 12 AWG)
Safety Agency Rating - Transformer is listed per UL1876
Colors - White (-WH)
Rotation - Against wall on InvisiBall Base: 37° vertical, 44° horizontal
On bracket: 44° all directions
Dimensions (H x W x D) - 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (each) - 4.0 kg (9 lb)
Shipping Weight (pair) - 9.0 kg (20 lb)
Included Accessories - 1 pair MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
Skip to content
