The NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution which can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks. Any source can be sent to one or more displays by routing through layer 2 / layer 3 switches utilizing standard Cat5e cable. The NMX-DEC-N2322 includes standard features like output scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension.
Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders.
Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, highdensity installations
Infrared (IR) – Emitter connection allows control of IR-only display devices
Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
Balanced and Unbalanced Audio – Embedded 7.1 digital audio or balanced/unbalanced analog audio
Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections
KVM –Dual USB-A control for KVM applications
Native NetLinx – NetLinx Studio can easily recognize the device
Display ... Show More
The NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution which can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks. Any source can be sent to one or more displays by routing through layer 2 / layer 3 switches utilizing standard Cat5e cable. The NMX-DEC-N2322 includes standard features like output scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension.
Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders.
Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, highdensity installations
Infrared (IR) – Emitter connection allows control of IR-only display devices
Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
Balanced and Unbalanced Audio – Embedded 7.1 digital audio or balanced/unbalanced analog audio
Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections
KVM –Dual USB-A control for KVM applications
Native NetLinx – NetLinx Studio can easily recognize the device
Display Your Hospitality with Brilliant 4K Video Distribution
The AMX SVSI N2300 series encoders and decoder distribute stunning 4K visual quality with low latency, low bandwidth consumption, and low power consumption - all at an extremely competitive price. Perfect for casinos, bars and restaurants, hotel spaces, and anyplace video can enhance the guest experience.
Reinvent Space
Need to add video displays to a ballroom? Run video to temporary lobby kiosks? No problem. The N2300 is perfect for reconfigurable spaces. Simply run a standard category cable, add a decoder, and access video from the network.
Grow Big or Small
Expand without replacing infrastructure. With the N2300, simply add an encoder to each additional video source and a decoder to each additional video display or projector. So go ahead, add as many displays as you want for the big game.
Feature-Rich. Enterprise Grade. Secure.
Enterprise grade features like Power over Ethernet, LocalPlay, HostPlay, HDMI 2.0/HDCP 2.2 support, and the ability to easily adjust bandwidth and resolution to precisely meet the needs of the application; along with AES128 encryption makes it clear that our products are designed with the enterprise network in mind.
Video
Video Input - Network video over Ethernet via RJ45 port or fiber via 1G SFP port
Video Output - HDMI 2.0, DVI-D (through adapter)
Formats - HDMI 2.0, DVI-D (through adapter), HDCP 2.2 content protection support
Video Codec - Motion-based wavelet technology
Input Resolutions - Supports most common resolutions from HD up to 4096x2160; Encoder for all supported resolutions
Output Resolutions - 720p, 1080p, 4K30 or input resolution if scaler is disabled
Output Scaling Note: there are no limitations when upscaling to 720p, 1080p, 4K30; A 4K30 signal can be downscaled to 1080p without issue. Scaling down to 720p from either 4K30 or 1080p is not supported in the product.
Color Space - 4:2:0 4K30 4:2:2 – HD
LocalPlay/HostPlay - 8 playlists HostPlay 1 image/list
Note - Jumbo Frames Required
Video Wall Construction - Supported within the NMX-DEC-N2322, the N2300; Series is not compatible with SVSI Windowing Processors at this time
Network Video Recording - Not compatible with SVSI NVR at this time
AUDIO – SIGNAL TYPES
Input Network - audio over Ethernet via RJ45
Output - Embedded audio on DVI-D or HDMI (through adapter), analog audio output
KEYBOARD AND MOUSE
Keyboard & Mouse - Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
AUDIO - FORMATS
Input Signal Types - Network audio over Ethernet via RJ45
Output Signal Types - Embedded audio on HDMI or DVI-D (through adapter)
HDMI Audio Formats - 8ch PCM
Analog Audio Format - Stereo 2-channel
Audio Breakaway - Supported
LATENCY
Latency - 17-ms at 60fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30 4K resolutions; NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency and screen latency; Scaling adds one frame of latency (17ms at 60fps).
Switching - Up to 1.5s delay, not seamless
COMMUNICATIONS
Ethernet - P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
P1: 1 Gbps SFP port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
HDMI - HDCP, EDID management
PORTS
+12V 2A - One 12 Volt DC power input
P0 - 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port; Provides network connection, network AV video, and power to the Encoders and Decoders (PoE power)
P1 - 1-Gbps SFP+ port (SFP+ fiber transceiver or direct attach cable not included); Provides network connection and networked AV video
IR OUT - 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included).
RS232 - 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communicatio; Available terminal speed settings: 9600-115200 baud rate.
AUDIO - 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced output.
HDMI OUT - HDMI video output
CONTROLS AND INDICATORS – FRONT PANEL
RESET Button - Recessed pushbutton; Press to initiate a 'warm restart' causing the processor to reset, but not lose power; A reset does NOT affect the current settings
ID Button - Recessed pushbutton; Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
POWER LED - On solid (green) when operating power is supplied (via PoE or local power supply); This activity is also shown by the PWR LED on the rear panel
STATUS LED - On flashing (green) when there is software activity; This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS – REAR PANEL
PWR LED - Same as POWER LED described above
HDMI LED - On (green) when there is a connection to a valid display
STAT LED - Same as STATUS LED described above
STRM LED - On (green) when the unit is receiving video
POWER SUPPLY
Power Supply, External, Optional - 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional NMX-ACC-N9312 (FGN9312)
Power over Ethernet (PoE), External, Optional - Can be powered via a PoE switch or other equipment with a PoE source; Conforms to IEEE 802.3af Class 3 (802.3at Type 1); NOTE: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port
Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
ENVIRONMENTAL
Temperature - 32° to 104°F (0° to 40°C)
Humidity - 10% to 90% RH (non-condensing)
Heat Dissipation - Up to ~44 BTU/hr
GENERAL
Dimensions (HWD) - 1.05” x 7.888” x 5.5” (2.67 cm x 20.04 cm x 13.8 cm)
Weight - 1.6 lbs (0.66 kg)
Mounting Options - Stand alone, surface mount, wall mount, or rack mount
Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
Rack mounting requires (not included): NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders
Regulatory Compliance - FCC, CE, and NTRL
Recommended Accessories - NMX-ACC-N9312 (FGN9312), Power Supply 12V External
NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders and Decoders
NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders and Decoders
Skip to content
