The 3.5mm (1/8") stereo TRS connector is more commonly known as the Headphone Jack on portable mp3 players and mobile phones. This cable features a...
View full details
6inch 3.5mm Stereo Plug/Two 3.5mm Stereo Jack Cable The 3.5mm (1/8") stereo TRS connector is more commonly known as the Headphone Jack on portable ...
View full details
Don't get weighed down and stay light on your feet next time you hit the course with the Stainless Steel 7-in-1 Multi-Function Golf Tool! Instead o...
View full details
Product Specifications: Output: 150 (High)/60(Low) Lumens Light distance: 49 ft./15 M Lighting: 2835 - 12 LED Lighting Modes: High, Low, SOS LED ...
View full details
More than just a light! The Technical Pro Camping Lantern offers you 4 different functions that can get you through a weekend outdoors or in an eme...
View full detailsCrown XLi 3500 Two-channel, 1350W at 4-ohm Power Amplifier
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Product Highlights:
RCA and XLR inputs
... Show MoreCrown XLi 3500 Two-channel, 1350W at 4-ohm Power Amplifier
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Product Highlights:
RCA and XLR inputs
User selectable input sensitivity: 0.775V and 1.4V
Stereo/parallel/bridge-mono mode
Efficient forced-air cooling prevents excessive thermal buildup
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference
Key Features:
Crown XLi 3500
The Crown XLi 3500 Stereo Power Amplifier features both RCA and XLR inputs as well as Speakon and binding post outputs. The amplifier includes a user selectable input sensitivity of 0.755V or 1.4V, stereo/parallel-bridge-mono modes, power/fault/signal presence/clip LED indicators, forced air cooling, and protection against shorts, no-load, on/off thumps, and interference from radio frequencies in the environment.
Affordable, Reliable Powernology or Used as a Complement to Dante
Drawing from over six decades of experience in building amplifiers, the XLi 2500 is capable of delivering 750W per channel at 4 ohms, 500W per channel at 8 ohms, and 1500W at 8 ohms in bridged-mono mode.
Extended 6 Year Coverage
This protects you for a specific period from your date of purchase as stated in your bill of sale or as otherwise established by Harman. The coverage period will be extended to 6 years. Except as otherwise stated in this policy, this covers defects in materials and workmanship if: (1) you purchased this product from a dealer that is a Harman Professional authorized dealer with respect to this product at the time of your purchase; (2) your original, dated bill of sale is presented whenever service is required during the period; and (3) unless Harman states otherwise, you purchased this product in brand new condition.
Crown by Harman
Crown Audio is an industry leader in amplified sound. Crown makes amps for cinema venues, installed sites, touring rigs, portable PA and commercial audio. With over 67 years of focus on innovation and providing the best user experience, Crown Audio is continually raising the bar in audio amplification.
Product Specifications:
Frequency Response: 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD: less than 0.5 percent, 20 Hz - 20 kHz
Intermodulation Distortion: equal to or less than 0.35 percent (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB)
Slew Rate: greater than 10V/us
Voltage Gain: 36 dB
Damping Factor: (8 ohms, 10 Hz to 400 Hz) greater than 200
Signal To Noise Ratio (A-weighted): greater than 100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB
Input Sensitivity: (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced): 20k-ohm, 10k-ohm
AC Line Voltage and Frequency Configurations Available: (+10 percent) 120V - 60 Hz; 220V - 50/60 Hz; 230-240V - 50/60 Hz
Dimensions: 19” x 3.5" x 14.4" (48.3cm x 8.9cm x 36.6cm)
Weight: 43lbs (19.5kg)
IEC Power Connector: 15A
Skip to content
