The NEW APC Back-UPS BE600M1 (replaces BE550G) provides instant battery power to your critical electronics when the power goes out; keeping you connected and available both personally and professionally. Designed specifically to enhance the features that matter most to you; including more runtime; more battery backup outlets; and a USB port for charging convenience; the BE600M1 is also smaller and lighter than the previous BE550G.

Additionally; the BE600M1 UPS (uninterruptible power supply) offers guaranteed surge and lightning protection for attached devices. By connecting your valuable devices; you are ensuring these investments against potentially irreversible damage. When the power goes out; the APC BE600M1 will power critical devices including home networking equipment; allowing you to maintain your internet connection. This allows you to work productively; avoid the loss of valuable data; and safely shut down equipment.

This BE600M1 includes PowerChute Personal Edition software which provides UPS management options; safe system shutdown; and energy monitoring to enable cost savings and prevent potential data corruption. The BE600M1 also offers seven surge protected outlets; five of which provide UPS battery backup; and a 330-watt/600-volt ampere output power capacity.

Battery Backup Keeps Critical Components Running

The BE600M1 UPS offers guaranteed backup battery power for your electronic devices. When power is interrupted or fluctuates outside safe levels; the BE600M1 instantly provides clean battery power to your sensitive electronics. Work safely throughout brief outages or save your data and safely shut down electronics during extended outages. Additionally; the BE600M1 is smaller and lighter than previous models; allowing you to easily relocate and position your UPS in any environment.

Protection from Dangerous Surges and Spikes

The BE600M1 features a total of seven power outlets; all of which shield your devices against dangerous surges and spikes in voltage. Five of these are UPS battery backup outlets that provide instant power to critical devices like computers and home networking equipment when there is an outage. The BE600M1 provides one USB charging port; allowing you to conveniently charge your mobile devices (smartphones; tablets; portable gaming consoles; etc.) during power emergencies. This UPS system also offers transformer block spacing for three outlets; so you can connect bulky transformers without covering other outlets.

Maximizes Runtime for Heavy and Low Power Consuming Devices

The BE600M1 is designed to maximize runtime for devices such as multiple PCs and AV equipment that consume high amounts of power. After these devices are safely shut down; the BE600M1 continues to run low power loads (such as home networking equipment) for up to 4 hours during extended outages.

Prevent Data Corruption with PowerChute Software

APC PowerChute Personal Edition power and energy management software is included. PowerChute prevents data corruption by automatically saving files and shutting down your system in an extended power outage or low-battery condition. PowerChute monitors and displays energy usage and reduces costs via customized energy management planning. Connect the USB cable that's included with your UPS backup unit to your computer to easily download and use the software.

ENERGY STAR Rated for Efficiency

The Back-UPS BE600M1 is ENERGY STAR certified for its efficient operation and ability to help realize lower energy costs.

Product Features:

Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications
Audible alarms provides notification of changing utility power and UPS power conditions
Automatic self-test periodic battery self-test ensures early detection of a battery that needs to be replaced
Battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance
Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-start capable provides temporary battery power when the utility power is out
Disconnected battery notification warns when a battery is not available to provide backup power
Hot-swappable batteries ensures clean; uninterrupted power to protected equipment while batteries are being replaced
Simple battery replacement increases UPS availability by allowing quick; easy battery replacement
Transformer Block Spacing connect bulky transformer block plugs without covering up other outlets
USB connectivity provides management of the UPS via a USB port

Product Specifications:

Output

Output power capacity: 330Watts / 600VA
Max Configurable Power (Watts): 330Watts / 600VA
Nominal Output Voltage: 120V
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Topology: Standby
Waveform type: Stepped approximation to a sinewave
Output Connections: (5) NEMA 5-15R (Battery Backup); (2) NEMA 5-15R (selector_surgetitle)
Transfer Time: 6ms typical: 10ms maximum

Input

Nominal Input Voltage: 120V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: NEMA 5-15P
Cord Length: 5ft ( 1.52meters )
Input voltage range for main operations: 92 - 139V

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leak-proof
Typical recharge time: 10hour(s)
Expected Battery Life (years): 3 - 5

Communications & Management

Interface Port(s): USB
Control panel: LED status display with On Line: On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating: 490Joules
Filtering: Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous

Physical

Maximum Height: 5.47 inches (139mm; 13.9cm)
Maximum Width: 10.79 inches (274mm; 27.4cm)
Maximum Depth: 4.13 inches (105mm; 10.5cm)
Net Weight: 7.7 lbs. ( 3.49 kg)
Pallet Weight: 504.86lbs.
Units per Pallet: 60.0

Environmental

Operating Temperature: 32 - 104 degreeF ( 0 - 40 degreeC )
Operating Relative Humidity: 0 - 90 %
Operating Elevation: 0-10000ft ( 0-3000meters )
Storage Temperature: -15 - 45 degreeC
Storage Relative Humidity: 0 - 95 %
Storage Elevation: 0-50000ft ( 0-15000meters )
Audible noise at 1 meter from surface of unit: 35.0dBA
Online thermal dissipation: 16.0BTU/hr

Conformance

Approvals: California (CEC) Battery Charger; cTUVus; ENERGY STAR V1.0 (USA); FCC Part 15 Class B; NOM; UL 1778
Standard warranty: 3 years repair or replace

Sustainable Offer Status

RoHS: Compliant
REACH: Contains No SVHCs

Surge Protectors & UPS